Grass Valley LVS 100 v.3.15 - Manual (Page 100)

System Configuration and Startup
3-10
Profile LVS Event Management System Instruction Manual
Video Routing Tab
In the Video Routing tab, you can assign the crosspoints for video inputs and
outputs to the resources assigned on the Resource Assign tab.
Figure 3-4: Video Routing Tab
In the Video Routing tab, all the video input and output channels installed in the
Profile system are displayed. Use the crosspoints to assign video channels to
each of the resources as required. Only one physical input channel can be
assigned to the input channel of each resource, while multiple physical output
channels can be assigned to each resource, which routes the same video signal to
each of the assigned outputs.
When you assign an output channel on a 2 Channels resource, you can use the
crosspoints to assign EE and PB outputs independently. For a 1 Channel
resource, you can only assign EE and PB outputs as a set.