Grass Valley LVS 100 v.3.15 - Manual (Page 164)

Playlist Window
4-46
Profile LVS Event Management System Instruction Manual
Editing Packaged Playlists
A packaged playlist icon is managed as a single video unit. However in the
Playlist window, a playlist is disassembled into all of its constituent events,
which can then be managed event by event.
You can use this capability to reorder events in a packaged playlist . Drag the
packaged playlist back into the Playlist Window, edit the events to obtain the
desired order, then use the Add Highlight button to add the edited playlist to the
Highlight Window as a new packaged playlist.
Playback
You can play the events in a playlist either in CONT (continuous) or STEP
mode. Select CONT mode with the CONT button or STEP mode with the STEP
button by clicking the respective button on the window, or press the STEP or
CONT button on the LVS Live Controller. You can switch the modes while
playing. However, it requires about 5 seconds to make the switching effective
after pressing the button during play.
Swapping Playlists
The current playlist (original playlist) in this window may be temporarily stored
and replaced by an item from the Highlight Window. In the highlight Window,
you can select an item and click a Playlist button to play that material through
the Playlist Window. You can do this as often as you desire without affecting the
original playlist.
Once the playback operations have been completed, you can restore the original
playlist from the temporary storage location by clicking the Restore button in
the Other tab.
For more details, refer to Playing Back through the Playlist Window on
page 4–26.
Protecting Playback for ON AIR
There is dedicated button to prevent unexpected stopping by mistake. Refer to
ON AIR button on page 4–51 for detail.
Synchronization Between Two Playlist
Interlock capability to synchronize two Playlist operations. Refer to GangRoll
Function on page 4–52 for detail.