Grass Valley LVS 100 v.3.15 - Manual (Page 220)

Current Resource Information Window
5-8
Profile LVS Event Management System Instruction Manual
Click the Port button to open the Offset Setting of Playback Timecode panel for
each group, as shown in Figure 5–6. This panel allows you to set an arbitrary
start time for the running timecode.
To set a start time:
1. Enter the desired start time in the text boxes. The start time is in the
following format: Hours:Minutes:Seconds:Frames.
2. Click the Set button.
Click on the Port button again to close the Offset Setting of Playback Timecode
panel. And the GANG ROLL panel will be displayed.
Refer to Timecode Offset Window on page 5–4 for more information about
running timecode.
Figure 5-6: Offset Setting of Playback Timecode
Port Buttons