SMA WB 5000A-11 Installation - Manual (Page 29)

SMA Solar Technology AG Electrical Connection
Installation Manual WB5A_6A-IA-IEN114540 29
5.3 Setting the Display Language
You can set the display language using the switches underneath the display assembly inside the
inverter.
For inverters configured to the Italian country standard DK 5940, different switch positions apply.
You can find the standard to which the inverter was set upon delivery on the type label and the
enclosed supplement with the default settings. For more information, see the Technical Description
"Operating Parameters" at www.SMA.de/en.
Procedure
1. Open the inverter as described in Section 7.2 "Opening the Inverter" (page 57).
2. Set the switches to the required language as shown below.
For all country settings apart from DK 5940, the following switch positions apply:
For inverters configured to the country standard
DK 5940, the following switch positions apply:
3. Close the inverter as described in Section 7.3 "Closing the Inverter" (page 59).
☑ The display language is set.
Language Switch S2 Switch S1
German B B
English B A
French A B
Spanish A A
Language Switch S2 Switch S1
Italian B A
English A A
German B B
Spanish A B