SMA WB 5000A-11 Installation - Manual (Page 33)

SMA Solar Technology AG Electrical Connection
Installation Manual WB5A_6A-IA-IEN114540 33
5.4.3 Opening the DC Connector
1. Unscrew the screw connection.
2. Release the DC connector. To do so, insert a
screwdriver into the lateral shaft latching and lever
it open (blade width: 3.5 mm).
3. Carefully pull the DC connector apart.
4. Loosen the clamping bracket. To do so, insert a
screwdriver into the clamping bracket to lever it
open (blade width: 3.5 mm).
5. Remove the cable.
☑ The cable is now detached from the DC connector.