SMA WB 5000A-11 Installation - Manual (Page 45)

SMA Solar Technology AG Electrical Connection
Installation Manual WB5A_6A-IA-IEN114540 45
5.6 Communication
The inverter is equipped with a slot for communication interfaces which enable it to communicate with
data loggers (e.g., Sunny WebBox) or a PC with appropriate software (e.g., Sunny Explorer).
Refer to the communication interface manual for a detailed wiring diagram and installation
instructions.
The Power Reducer Box by SMA Solar Technology AG enables the active power of the inverter to be
limited or the displacement power factor to be set via external specification.
For detailed information on the Power Reducer Box, see the relevant technical description at
www.SMA.de/en.
5.7 Setting the Grid and Country Parameters
A detailed description of the operating parameters for the inverter is available in the download area
at www.SMA.de/en in the category "Technical Description" of the respective inverter.
5.7.1 Setting the Country of Installation
Using the "Default" parameter, you can set the country of installation and/or the grid connection
standard valid for that country via a communication product (e.g., Sunny WebBox) or a PC with
corresponding software (e.g., Sunny Data Control or Sunny Explorer). However, this is only required
if the inverter was originally ordered for another country. You can find the standard to which the
inverter was set upon delivery on the type label and the enclosed supplement with the default settings.
Changing grid-relevant and country parameters
To change grid-relevant parameters, you need a personal access code – the so-called
SMA Grid Guard code. The application form for the personal access code is available in
the download area at www.SMA.de/en, in the "Certificate" category of the respective
inverter.
Confirm the changes to these parameters with your grid operator.