SMA WB 5000A-11 Installation - Manual (Page 31)

SMA Solar Technology AG Electrical Connection
Installation Manual WB5A_6A-IA-IEN114540 31
5.4.2 Assembling the DC Connectors
For connection to the inverter, all connection cables of the small wind turbine system must be fitted
with the supplied DC connectors.
To assemble the DC connectors, proceed as follows. Ensure the connectors have the correct polarity.
The DC connectors are marked with the symbols "+" and " − ".
Cable requirements:
• Use a PV1-F cable.
Procedure
1. Lead the stripped cable all the way into the plug.
2. Press the clamping bracket down until it audibly
snaps into place.
3. Ensure that the cable is correctly inserted:
Result Measure
☑ If the stranded wires are visible in the
chamber of the clamping bracket, the cable
is correctly inserted.
• Proceed to step 4.