Bang & Olufsen BeoVision 9 User Guide - Manual (Page 11)

Switching source You can switch from one live source, such as TV.TUNER, to another,
such as STB, at any time, but the source you leave is no longer saved
to the buffer after the switch. Instead the new source is saved.
Switching to a non-live source, such as DVD, causes the TV to stop
saving to the buffer and ends replay.
NOTE! The content of the replay buffer is
not protected. If the buffer is full and you
continue to save programmes to it, the
oldest content is deleted. If you switch off
the TV, the content of the buffer is deleted
after 60 sec.
Backwards Backwards
Search for
start point
Search for start point Activate
saving
Stop
searching
Stop
searching
Select point Activate numbers
Step
Select point
Press Press
Replay Slow replay, press again to change
speed
or
Go to live signal
Replay Slow replay, press again to
change speed
Step
or
Forwards
or
Forwards
Press twice to
accept
or
Return to replay mode Go to live
signal
Return to replay mode
Press Press You can step frame by frame You can step frame by frame
Accept saving
Beo4 operation
To return to live signal, select source
again, such as TV
To return to the live signal
select the source again
STOP
STOP STOP
+
0–9 0–9
PLAY
STOP STOP Record Record RECORD
Replay
9