Bang & Olufsen BeoVision 9 User Guide - Manual (Page 24)

Useful hints
Two televisions in the same room
If you have two TVs in the same room and one remote control for both TVs,
it is essential that the TVs are set to the correct options, for them to
function properly.
If you place your TV in a room where you
already have a Bang & Olufsen TV and
commands from your remote control can be
received by both TVs, you must change the
option of the secondary TV to prevent
simultaneous activation of both TVs. Place
yourself in front of the secondary TV.
Set the correct option
Teletext with Option 4 In order to use teletext on a TV set to Option 4, you must set up Beo4 to VIDEO 3. This limits
the Beo4 functions that can be used with TVs set to other options. For more information, see
the Guide enclosed with your Beo4.
Press Select zone in which TV
is placed* 1
Select OPTION? and
accept
Select V.OPT Select
Option 4
Hold
and
Press
and
Hold Press
Select zone in which
desired TV is placed
Select source
Normally you can activate a source simply by
pressing the relevant source button, but if
you have two TVs in the same room, you
must remember first to select the zone of the
TV you wish to use, if you have a Beo5.
Beo5 – operate the TVs
LIST
…
LIST LIST 4
TV …
Option
pgm
BeoVision 9
Zone ‘A’
Zone ‘B’
TV
Zone ‘A’
TV
BeoVision 9
Zone ‘B’
22