Bang & Olufsen BeoVision 9 User Guide - Manual (Page 37)

Adjust picture and sound settings
Picture and sound settings are preset from the factory to neutral values which
suit most viewing and listening situations. However, if you wish, you can adjust
these settings to your liking.
NOTE! Do not allow still pictures, such as logos,
video games, computer images, and images
displayed in 4:3 format, to be displayed on the
screen for an extended period of time. This can
cause a permanent after-image to remain on
the screen. Temporary settings
‘DEFAULT VIDEO’
‘DEFAULT AUDIO‘
To only store picture and sound settings until you switch off the TV, press
and hold BACK instead of the centre button when you accept the settings.
The speaker combination chosen in the ‘DEFAULT VIDEO’ submenu is
activated automatically when you switch on a video source in the TV.
The speaker combination chosen in the ‘DEFAULT AUDIO’ submenu is
activated automatically when you switch on an audio source in the TV.
Preset volume, bass, treble or loudness, up to
two connected BeoLab subwoofers and two
default loudspeaker combinations. The contents
of the ‘SOUND’ menu varies according to what
you have connected to the TV. See also p. 30
about speaker combinations.
Adjust sound
Adjust brightness, colour and contrast. For
information on picture format, see p. 30.
Adjustments made to the ‘TINT’ setting only
apply to the current channel.
Adjust picture
Enter and accept
settings
Select ‘OPTIONS’
menu
Bring up ‘TV SETUP’
menu
Enter and accept
settings
Select ‘SOUND’ in
‘OPTIONS’ menu
Bring up ‘TV SETUP’
menu
Select ‘PICTURE’
menu
Select
‘ADJUSTMENT’
menu
Remove the picture from the screen temporarily.
Mute the picture
Select Picture
Bring up Scene
display on Beo5
Select PictureMute to mute/restore
PICTURE
BRIGHTNESS ....... . .......
CONTRAST ....... . .......
COLOUR ....... . .......
TINT ....... . .......
SIZE ....... . .......
HOR. SIZE ....... . .......
VERT. SIZE ....... . .......
HOR. POSITION ....... . .......
VERT. POSITION ....... . .......
select
SOUND ADJUSTMENT
VOLUME ....... . .......
BASS ....... . .......
TREBLE ....... . .......
SUBWOOFER ....... . .......
LOUDNESS ON
DEFAULT VIDEO SPEAKER3
DEFAULT AUDIO SPEAKER2
store
35
NTSC signal only
1080p/i signal only
VGA signal only