Bang & Olufsen BeoVision 9 User Guide - Manual (Page 35)

Play Timer
You can make your TV switch on and off automatically by setting a Play Timer
or a standby Timer in your main room system.
NOTE! Link room systems can perform the
timed play or timed standby functions as well.
However, you must programme Timers on your
main room system and activate them on your
link room system. Play Timer
Safety
Enter up to six Play Timers. Make sure that the clock is set to the correct
time for the Timers to be executed correctly, see p. 56. The TV cannot be
part of an ordinary Play Timer or standby Timer until the Wake-up Timer
has been carried out or disabled.
For safety reasons, the stand will not turn if the TV is switched on by a Play
Timer.
Preset your TV to start and stop automatically at
the same time and day every week.
Timed play and timed standby
To include the TV in the Play Timer, set the
Timer to ‘ON’.
Switch on the Play Timer
View, edit or delete a Timer
View, edit or delete a Timer from the list of
settings you have entered.
Select ‘PLAY TIMER
INDEX‘ in ‘PLAY
TIMER’ menu
Bring up ‘TV SETUP’
menu
Select Timer
Edit settings or delete
Timer
Select ‘ON’ and
accept
Select ‘PLAY TIMER’
menu
Bring up ‘TV SETUP’
menu
Enter and accept
settings
Select ‘PLAY TIMER
PROGRAMMING’
menu
Bring up ‘TV SETUP’
menu and select
‘PLAY TIMER’ menu
Select ‘TIMER ON/
OFF’ menu
Select source
The source names corresponds to what the
sources are registered as in the ‘CONNECTIONS’
menu
33
TV
DTV
DTV2 (V.AUX)
V.MEM
DVD/DVD2
V.AUX2
CD
N.MUSIC
N.RADIO
A.MEM
RADIO
DTV RADIO
STANDBY