Bang & Olufsen BeoVision 9 User Guide - Manual (Page 47)

Run cables
Overview
To allow for the movement when the TV turns, the
cables must form a broad loop and be fastened to
the cable bracket.
To decide how much ‘slack’ the cables need,
gently turn the TV all the way to the left, before
you fasten the cables with cable strips to make a
‘neat’ bundle of cables.
Locate the connection panels and other important
items:
1 Standby indicator/receiver for remote control.
2 Side connection panel (input for mains supply,
aerial input for TV signal, connections for
BeoMaster).
Tilt the main connection panel (4) forward to
get acces to the sockets.
3 Cable bracket.
4 Main connection panel with built-in tray and
cover for cables.
Tilt the panel forward to remove cover.
Open tray along the side to ease access when
running cables.
NOTE! Do not allow still pictures, such as logos, video games, computer images, and images displayed
in 4:3 format, to be displayed on the screen for an extended period of time. This can cause a permanent
after-image to remain on the screen.
1 1
4
3
4
2
3
45