Connection panels, Useful hints – Bang & Olufsen BeoVision 9 User Guide User Manual
Page 52
Connection panels
Any equipment you connect to the main connection panel must be registered in
the ‘CONNECTIONS’ menu. See p. 47.
The CA module has one protruding edge on one
side and two on the other side. The side with two
edges should face right. When you insert a card,
the gold chip should face upwards.
HDMI source You can watch two HDMI sources at the same time if one of the sources is
connected to the HDMI A or HDMI B socket, and the other source is connected
to the HDMI C or HDMI D socket.
1
*Only connect to a local area network (LAN) that
does not exit your flat, house or building.
Useful hints
TV
Aerial input socket from external aerial/analogue
cable TV network.
ML
For a compatible Bang & Olufsen audio system.
Available only if the TV has a BeoMaster.
AUX
21-pin socket for additional video equip ment to
enable external copying.
USB
For connection of USB-enabled equipment.
Available only if the TV has a BeoMaster.
Ethernet*
1
For connection to the Internet. Available only if
the TV has a BeoMaster.
~ – Mains supply
Connection to the mains supply.
SMARTCARD
PCMCIA
POWER LINK
CONTROL
CENTRE 1
CINEMA
MONITOR
SMARTCARD
PCMCIA
IR IN
DTV DATA
MASTER LINK
1(SUB)
1
2
3
2
3
4
TTL
5
6
ANT
HDMI IN
DVI-D OUT
AV 4
AV 3
RS232
IR IN
CTRL
SPDIF
VIDEO IN
L IN
R IN
IR 1+2
LINK TV
S VIDEO
Y
SPDIF
CTRL
Pb
Pr
AV 2
AV 5
AV 1
Y
SPDIF
DISPLAY 1
CTRL
SPDIF
CTRL
Pb
Pr
R IN
L IN
VIDEO
IN
SPDIF
CTRL
DISPLAY 2
A
B
C
D
AV 6
R IN
L IN
VIDEO
IN
SPDIF
CTRL
VGA
S VIDEO
ML
AUX
TV
50