Bang & Olufsen BeoVision 9 User Guide - Manual (Page 7)

Second source
2 *TV positions
You can bring up two video sources. With Swap you can make the
left and right pictures switch places. With BACK you leave the
function and go to the source on the left. You can also just select
the source you wish to go to. See also p. 50 for information about
HDMI sources.
Position 1 is the far left position and Position 9 is the far right.
Beo4 operation
Press Select
STAND
Adjust volume. To mute, turn quickly
counter-clockwise
Adjust
volume
To mute, press in the middle
of the button
Select
P-AND-P
Press Swap pictures Select
source
Select source
Start recording Stop recording
Press
Press Press
Hold for
channel list
Select channel Select page Accept
or
Activate
numbers
Select Select
channel
or or
Select Select
channel
Hold to
activate
Select page or channel and
accept
Bring back the sound by turning the
wheel either way.
Press twice to start Press twice to
stop
or or
Press Turn TV
or
Turn TV
Swap pictures
or
Select position* 2 Select
position* 2
Select previous channel Previous
channel
NOTE! To use the stand function, you have
to calibrate the stand first, see p. 53. To
preset positions for the TV to turn to, see
p. 56.
Press
TV TV
+
0–9
+
0–9
Record Record RECORD STOP
Stand Turn Turn
Position
1…9 LIST
0–9
1–9
P-and-P DVD Swap LIST DVD 0
STOP STOP
Previous 0
5