E-Tech STYLUS Pro WT7900 - Manual (Page 101)

101
Maintaining and Transporting the Printer | 101
Preparing the Printer for Shipment
1. Press the P power button to turn off the printer.
Wait until the lights on the control panel stop flashing and go out, and
then unplug the printer.
2. Remove the following parts:
• Power cord and interface cables
• Film and paper baskets
• All paper or other media
• Optional SpectroProofer (if installed)
3. Leave the ink cartridges installed.
4. Open the front cover and reinstall the packing material that you
removed from the print head during setup. Then close the cover.
5. Before you remove the printer from the stand,
make sure the casters are locked.
Caution: Always turn off
the printer by pressing
the P power button.
During shutdown, the
printer caps the print
head and flushes it with
cleaning liquid. This takes
several minutes to
complete. To prevent
damage, never unplug
the printer during this
process.
Tip: For more secure
transportation, tape all
doors and covers shut.