E-Tech STYLUS Pro WT7900 - Manual (Page 40)

40
40 | Setting Up the Printer
6. After installing all 11 cartridges, close the ink covers. The printer begins
charging the ink delivery system and the P power light flashes.
After ink charging is completed, you need to load paper before READY will
appear on the display.
Aligning the Print Head
Before using your printer, you need to align the print head for best results.
1. Load the bundled roll paper included with the printer. See page 49 for
instructions on loading roll media.
When you’re prompted to choose the paper type, select Bundle Roll
Paper .
2. Follow the instructions on page 87 to align the print head.
After the alignment is complete, return to this chapter and follow the
remaining instructions to finish setting up your printer.
Caution: Charging takes
about 15 minutes. Never
turn off the printer,
remove the maintenance
tank, or open the front
cover or ink covers while
the
P power light is
flashing, or you may
damage the printer.