E-Tech STYLUS Pro WT7900 - Manual (Page 41)

41
Setting Up the Printer | 41
Connecting to Your System
You can use USB and/or Ethernet network connections.
For USB connection, make sure your system has the appropriate port and
you have a standard, shielded cable up to 10 feet (3 m) in length.
To connect to a network hub, you need a standard RJ-45 CAT-5 network
cable. To connect directly to your computer’s network interface, you need
an RJ-45 CAT-5 crossover cable.
1. Make sure that both the printer and the computer are turned off.
2. Plug the interface cable into the appropriate port on the printer.
3. Plug the other end of the cable into the appropriate connector on your
computer or router.
Installing the Software
Follow these steps to install the software for your printer (Windows only).
1. Make sure your printer is turned off.
2. Turn on your computer.
Network connection USB connection