E-Tech STYLUS Pro WT7900 - Manual (Page 14)

14
14 | Introduction
Ink Cartridge Safety Instructions
• Keep ink cartridges out of the reach of children and do not drink the
ink.
• Store ink cartridges in a cool, dark place.
• If ink gets on your skin, wash it off with soap and water. If ink gets in
your eyes, flush them immediately with water.
• Shake all ink cartridges before installing them for best results (see
page 88). White ink cartridges must be shaken regularly to maintain
print quality, even after being installed (see page 78).
• Do not use an ink cartridge beyond the date printed on the cartridge
carton.
• Use up the ink cartridge within six months of installation for best
results.
• Do not dismantle ink cartridges or try to refill them. This could damage
the print head.
• After bringing an ink cartridge inside from a cold storage site, allow it to
warm up at room temperature for at least three hours before using it.
• The IC chip on the ink cartridge retains a variety of cartridge
information, which allows you to remove and reinsert it freely.
• If you remove an ink cartridge for later use, protect the ink supply area
from dirt and dust, and store it in the same environment as this product.
Note that there is a valve in the ink supply port, making covers or plugs
unnecessary, but care is needed to prevent ink from staining items that
the cartridge touches.
• Do not touch the ink supply port, its surrounding area, or the green IC
chip on the top of the ink cartridge. Doing so may affect normal
operation and printing.
Caution: To prevent ink
leakage, don’t shake
cartridges too forcefully.