E-Tech STYLUS Pro WT7900 - Manual (Page 116)

116
116 | Solving Problems
Solving Paper Problems
If paper feed or paper jam problems occur frequently, try one or more of the
following solutions:
• Make sure the printer’s environment falls within the required
temperature and humidity range (see page 121).
• When storing and using Epson film, strictly follow the temperature and
humidity guidelines on page 45.
• When printing on Epson film, be sure to use the film basket to catch
your prints (see page 59).
• Make sure no foreign objects are inside the paper path.
• Make sure the printer isn’t located in a brightly lit area. The paper
sensors may not operate correctly.
If you’re using non-Epson media or a non-supported Epson paper type, you
may need to adjust the settings for the paper in your printer software, or
create custom paper settings using the printer’s control panel; see page 73.
• See the instructions included with the paper, and follow the paper
manufacturer’s guidelines.
• For roll paper, try adjusting the PAPER SUCTION setting. See page 73
for more information.
• For heavy or thick media, follow the instructions on page 68 to load the
media correctly.
• Make sure the paper is not folded, wrinkled, or damp.
• Make sure the paper is not too thick or too thin. See page 65, page 122,
and page 123 for paper specifications.
• Make sure the PLATEN GAP setting is correct for the paper or media
you’re printing on. See page 69 for more information.
If you customize the paper settings, be sure to return to the standard settings
when you’re done.