E-Tech STYLUS Pro WT7900 - Manual (Page 45)

45
45
The Epson Stylus Pro WT7900 is designed to print with white ink on
selected Epson media, such as Epson ClearProof™ Film and CrystalClear™
Film. These media are available as rolls in either a 17-inch or 24-inch width
(432 mm or 610 mm). You can also print on a variety of other roll paper and
cut sheet media by customizing the settings for your paper.
Additional film types may be available. Check the Epson Pro Imaging
website at www.proimaging.epson.com or your Epson Professional Imaging
Authorized Reseller for more information.
This chapter includes the following topics:
• Using Epson film
• Loading film in the printer
• Using the film basket
• Using Epson paper
• Using the paper basket
• Customizing paper settings
Using Epson Film
The characteristics of Epson film differ from other media you may be used
to. When printing on Epson film, carefully follow the guidelines below for
best results.
Temperature and Humidity
To ensure consistent color in the white areas of your prints, use Epson film
within these environmental conditions:
• Temperature: 68 to 77 °F (20 to 25 °C)
• Humidity: 40 to 60% RH
To maintain print quality, keep your prints in the same conditions. Avoid
direct sunlight, high temperature, and high humidity. Keep unused media in
its original packaging—including the bag, end caps, and box—and store it at
room temperature and in a dry location.
Chapter 2:
Using Film and
Other Media
Note: Refer to the
instructions included with
the media for details.