E-Tech STYLUS Pro WT7900 User Manual
Page 110
110
110
|
Solving Problems
PAPER OUT
LOAD PAPER
No paper is loaded.
Load paper.
The
button has been
pressed with no paper loaded.
Press the
button, then load paper.
Paper ran out during printing.
Press the
button and remove the roll
paper core. Then load another roll.
PAPER RELEASED
LOAD PAPER
The
button has been
pressed.
Load paper, then press the
button.
PAPER SENSOR ERROR
PRESS THE
BUTTON
LOAD THE CORRECT PAPER
The paper is not detected.
Press the
button to clear the error,
then select the right paper.
PAPER SETTING ERROR
CHECK THE PAPER SOURCE
IN THE DRIVER SETTINGS
AND LOAD PAPER
CORRECTLY
The paper source selected in
your printer software and the
control panel do not match.
Check the paper source settings and make
sure the paper is loaded correctly.
PAPER SIZE ERROR
LOAD CORRECT PAPER SIZE
The loaded paper size does not
match the size of the image.
Make sure the paper size matches the size
of the image.
PAPER SKEW
LOAD PAPER PROPERLY
Paper is not loaded straight.
Press the
button and make sure the
paper is loaded straight.
PRINTER ERROR
RESTART THE PRINTER
You tried to print while an error
condition was present.
Press the P power button to turn off the
printer, then turn it back on.
REMOVE AND SHAKE
WHITE INK CARTRIDGE
ONCE A WEEK
It’s been a week since the
white ink cartridge was shaken.
To maintain optimal print quality, shake the
white ink cartridge as soon as possible. See
page 79 for instructions.
REPLACE MAINTENANCE
TANK SOON
The maintenance tank is almost
full.
Make sure you have a replacement
maintenance tank.
SOME NOZZLES ARE
CLOGGED
During automatic head
cleaning, the printer was
unable to clean the print head
after one or two cleaning
cycles.
You can continue to print, but you may
notice a decline in print quality. If necessary,
check and clean the print head as described
on page 83.
Message
(in alphabetical order)
Explanation
Response