E-Tech STYLUS Pro WT7900 - Manual (Page 47)

47
Using Film and Other Media | 47
2. Continue to remove the backing slowly and carefully to avoid creasing
the media.
3. Once you’ve removed the backing, touch a metal part of the printer (or
other grounded object) to discharge possible static electricity buildup
caused by removing the backing.
Additional Handling Precautions
• Do not wet the surface of your printouts—for example, by cleaning
them with a moist cloth. Otherwise water stains may be left behind.
• Avoid storing your printouts where they will be exposed to high
temperature, humidity, or direct sunlight.
Loading Film in the Printer
See the sections below for instructions on making appropriate printer
settings and loading the film for printing.
Selecting the Paper Type
Whenever you print with Epson film, be sure to select ClearProof Film as
the Paper Type setting:
1. Press r Menu .
2. Press u or d to select PAPER SETUP , then press r.
3. Select PAPER TYPE , then press r.
4. Select ClearProof Film , then press the OK button to save the setting.
5. Press to exit the menu.
Caution: Static electricity
is generated when
removing the backing.
Keep away from delicate
instruments when
removing it.
Note: If you want to print
with media other than
Epson film, you’ll need to
change the Paper Type
setting. See page 65 for
more information.