Various tips – Silvercrest SFM 840 A1 User Manual

Page 14

Advertising
background image

12

materials such as scouring solution or
steel wool.

6. Clean the fat container 6 with a soft,

damp cloth to which you have added a
little mild detergent.
Note: Microfibre cloths that absorb fat
are also very suitable here.

7. Wipe off with fresh water.
Note: You can easily transport the deep-fat
fryer using the carry handles 7 on the sides.

10. Various tips

Tip 1: How to avoid the excess
formation of acrylamide
Acrylamide is a chemical substance that is
formed whenever foods containing starch or
a certain protein compound at prepared at
temperatures over 100 °C.
• Wherever possible, you should avoid

excess browning, high temperatures for
baking or frying or fierce frying.

• You should not eat burnt food at all.
• When deep-frying, you should avoid

temperatures of over 170 °C.

• Make sure that the colour of the fried

items is “golden yellow” rather than
brown or dark. Browning may develop
very quickly. Use the viewing window to
observe the browning level of the fried
items.

Tip 2: How to fry frozen items
perfectly every time
Caution!
• Preferably, thaw out frozen food at room

temperature before frying. Remove as
much ice and water as possible before
placing the items in the fryer. Add the
food as slowly and carefully as possible
to the fryer because frozen food can
abruptly and quickly cause the hot oil or
fat to bubble.

• Frozen food (-16 to -18° C) greatly

cools down oil or fat, therefore it fries

more slowly and may absorb too much
oil or fat. You can prevent this as follows:

Never fry large quantities at the same time.
1. Heat the oil for at least 15 minutes prior

to frying.

2. Set the temperature selector 11 to the

temperature stated on the pack of the
frozen food.

Tip 3: How to get rid of undesired
aftertastes
Some foodstuffs, such as fish, leach liquid
during frying. It collects in the frying oil or fat
and thus impairs the smell and taste of the
fried food.
To have neutral tasting oil or fat again,
proceed as follows:
1. Heat the oil or fat to 160 ° C.
2. Place two thin slices of bread or a few

sprigs of parsley in the stainless steel
fryer.

3. Wait until the oil or fat no longer

bubbles.

4. Remove the bread or the parsley with a

slotted spoon. The oil or fat has a neutral
taste again.

RP89446 Friteuse mit Fondue LB4 Seite 12 Dienstag, 2. April 2013 2:46 14

Advertising