Radio remote control, Switching on and off, Manual mode – MCZ Boxsystem 75 FR User Manual

Page 32: Automatic mode

Advertising
background image

Chapter 5

INSTALLATION AND USE MANUAL

page

32

Operation

Technical service – MCZ S.p.A. all rights reserved - Reproduction prohibited

MANUAL

The fan (5) runs at the set speed regardless of the

probe.

AUTOMATIC The fan (5) runs at the set speed with the consent of

the probe.

5.7.1.1. Radio remote control

The radio remote control has 4 buttons with which it is possible to

perform the following operations:

• On/off (blue button)
• Change operation mode from manual to automatic and vice

versa (red button)

• Variation of the 4 speeds of the fan (yellow buttons)

5.7.1.2. Switching on and off

SWITCHING ON:

Prolonged pressure on the blue button of the

radio remote control switches on the fan at the

first speed in MANUAL mode. The control unit

emits one short beep that identifies the1

st

speed in manual mode.

SWITCHING OFF:

Prolonged pressure on the blue button of the

radio remote control puts the device in STAND-

BY, which is signalled by 1 very long beep,

and stops the fan.

5.7.1.3. Manual mode

In a predefined manner at the switch-on using the ON/OFF button or

through a simple click on the red MAN/AUT button, the system goes

into MANUAL mode. This mode can be recognized by the fact that all

the sound signals emitted by the control unit in this state are

short beeps and the fan is always on, regardless of the

temperature.
The yellow buttons + and - can be used to increase/decrease the fan

speed from the 1

st

to the 4

th

speed and vice versa. The control unit

responds with a number of beeps corresponding to the selected speed:

1

st

Speed

= 1 short BEEP

2

nd

Speed

= 2 short BEEPS

3

rd

Speed

= 3 short BEEPS

4

th

Speed

= 4 short BEEPS

Regardless of whether the insert is on or off, the ventilation switches

on and emits air according to the set speed.

5.7.1.4. Automatic mode

Once the ventilation has been switched on in manual mode, simply

pressing the red MAN/AUT button cause the device to go into

AUTOMATIC mode. This mode can be recognized by the fact that all

the sound signals emitted by the control unit in this state are

long beeps.

Advertising