Solare Datensysteme Solar-Log - Manual (Page 88)

88
Operating the Solar-Log 1200 and 2000 via Touch Display
Import yield data:
•
The Solar-Log™ searches for a valid solarlog_backup.dat file on the USB stick and imports it.
Import configuration:
•
The Solar-Log™ searches for a valid solarlog_konfig.dat file on the USB stick and imports it.
Firmware update:
•
The Solar-Log™ searches for a firmware update to import and then starts the update.
Note !
For technical reasons, only the last 30 days of minute values are saved in a backup.
To maintain a permanent record of your data (including minute data), we rec-
ommend registering your Solar-Log with our Classic-2nd Edition or Commercial
Edition portal.
Note !
As soon as a USB stick has been plugged in, the folder named "Backup" is auto-
matically created on the USB stick. At the end of the day, the Solar-Log™ saves a
daily backup with the date in this folder.
Important!
The Solar-Log™ does not overwrite the daily backup files. Thus it is important to
regularly backup or exchange the USB stick before it runs out of space.
Important!
When importing data from the USB stick, all of the data on the device is deleted
and replaced.
Note !
Import the current configuration before importing saved yield data.