PLANET IPX-2000 - Manual (Page 14)

PLANET IPX-2000 user’s manual
14 of 51
3.3 STUN service
Select Service -> STUN service to specify a Simple Traversal of UDP through NATs (STUN)
server for NAT traversal. You can enable or disable STUN service at any time.
3.3.1 Enable STUN service
Select Enable radio button, enter the fully qualified domain name or the IP address of a STUN
server, and then click Save button. IP PBX service needs to be reloaded to reflect the change.
3.3.2 Disable STUN service
Select Disable radio button, enter the fully qualified domain name or the static IP address of the
external WAN interface and then click Save button. Usually this address refers to the static
WAN IP address if there is a NAT device between the IP PBX and the Internet. If the WAN port
of IP PBX directly connects to Internet or it is unused, leave the address blank.
3.4 TFTP service
Select Service -> TFTP service, this page indicates current status of TFTP service. You can
enable or disable TFTP service at any time.
3.4.1 Enable TFTP service
Select Enable radio button, then click Save button. Afterwards, you are able to do file
management, e.g. upload and download files to and from IP PBX through TFTP service.
3.4.1.1 Change Directory
• Choose directory in Directory drop-down list.