PLANET IPX-2000 - Manual (Page 27)

PLANET IPX-2000 user’s manual
27 of 51
Table 4-3-1 Device Configuration Settings
Field
Description
Device ID A unique ID containing alphabets, numbers,
and underscore only without spaces; 32
characters maximum.
Device administration URL (Optional) Administration URL of the device.
(Optional) For phones support auto-config,
check to specify the MAC address and audio
preferences of the phone. Each field is
explained as followings. Note that for phones
using HTTP for auto-config, DHCP setting
needs a new option 151 with a value of
http://<IP PBX LAN IP>/tftpboot/. No extra
setting if the phone uses TFTP for auto-config.
Vendor prefix
Specify if provided by phone
MAC address MAC address of the device
Supplementary
configuration Specify if provided by phone
Codec
preference Preference order of
supported codecs and packet
times by phone
Enable VAD VAD on phone
Enable Automatic Client Configuration
DTMF mode DTMF mode used by phone
Table 4-3-2 Device Extension Configuration Settings
Field
Description
Extension number A unique line number composed of digits
only, e.g. 101; 32 digits maximum. This is the
login ID on the device configuration side.
Password Password of this extension. Same password
must be configured on the device side as well.
Pickup group The pickup group the extension belongs to.
Extensions in the same pickup group can call
*8 to pick up a call in ringing state.
Unavailable timeout Timeout for ringing before a call is answered.
Line type Specify the type of connection, wired or
wireless, of the client with the extension.
User
12
Select the user this extension associates with.
F
There may not be appropriate users to
select initially. One can come back later once
the expected user has been added.
Voicemail Select enable to allocate voicemail account for
the extension.
12 Please refer to 3.9 for details.