PLANET IPX-2000 - Manual (Page 36)

PLANET IPX-2000 user’s manual
36 of 51
3.14.1 Add PSTN Trunk
• Click <Add new> button from the left panel.
• Enter settings shown in Table 4-7.
• Click Save button.
The newly added PSTN trunk shall be displayed in Trunks panel on the left side.
3.14.2 Edit PSTN Trunk
• Click the link of trunk to edit from the Trunks panel.
• Edit settings shown on the right side.
• Click Save button.
3.14.3 Delete PSTN Trunk
• Click the link of trunk to delete from the Trunks panel.
• Click Delete button.
The deleted PSTN trunk shall disappear from the Trunks panel.
Table 4-7 PSTN Trunk Configuration Settings
Field
Description
Trunk group ID number of this PSTN trunk group. A valid
number ranges from 1 to 31.
Description Arbitrary description info.
Trunk ports FXO port indices grouped by this PSTN
trunk, such as 1 or 1,2 or 1-3, etc. Maximum
port index depends on the number of physical
ports available.