PLANET VIP-192 - Manual (Page 16)

enter the column as user needs and insert the necessary data.
Figure 10. IP settings
1. DHCP
Use joystick to select either ［Enable］ or ［Disable］, select ［Enable］ the IP will be obtained
automatically or user should setup IP manually by choosing［Disable］. Press <left soft key> Ok
to save the configuration.
Figure 11. DHCP settings
2. Static IP
Get the information from the service provider before user enters data into the filed. Use joystick to
locate the column of filed where user is going to input the data; also use <right soft key> Clear to
clear data. Press <left soft key> Ok to save the configuration.
Figure 12. Static IP settings
16