Voice communications, Peer to peer (p2p) mode, Appendix a – PLANET VIP-192 User Manual
Page 70
Appendix A
Voice Communications
The chapter shows you the concept and command to help you configure your Wi-Fi Phone through
sample configuration. And provide instruction to make calls to desired destination in Wi-Fi Phone. In
this section, we’ll lead you step by step to establish your first voice communication via keypad
operations.
Peer To Peer (P2P) mode
Assuming there are two VIP-192 in the network and the IP address are 192.168.0.1 and 192.168.0.2
Figure 115. Topology of instruction example - P2P mode
Test the scenario:
1. VIP-192_A press the keypad:
192.168.0.2
and press the <left soft key> Dial to connect to
VIP-192_B.
2. Then the Wi-Fi Phone in 192.168.0.2 should ring. To press <off hook>
(Green)
key or <left
soft key> Talk to begin conversation.
3. Please repeat the same dialing steps on VIP-192_B to establish the first voice communication from
VIP-192_A.
70