PLANET VIP-192 - Manual (Page 65)

on RFC2833.
Payload Type Setting the payload type for the Out Band DTMF (Default is 101).
Table 21. Voice setting description
Phone Setting
Figure 108. Phone setting
Field Description
Tone Setting
Select the tone for particular country
Ringer Type Select the type of ring (1 ~ 15).
Hold Tone Select the type of hold tone (1 ~ 15).
Do Not Disturb
Reject all incoming calls.
Call Waiting Enable or disable call waiting.
Anonymous Call
1. If DISABLE is selected, full URI and name are sent to the
receiver’s phone when the user makes a phone call. The URI
and name of the caller are displayed on the receiver’s phone.
2. When Full URI is selected, it uses “Anonymous” as its display
name and URI when the user makes a phone call. It may
display “Anonymous” or nothing on the receiver’s phone.
3. When Display Name is selected, only display name is replaced
by “Anonymous” when the user makes a phone call. It may
display “Anonymous” or nothing on the receiver’s phone.
Anonymous Call
Reject
Select Enable to reject anonymous calls.
65