Sony Cyber-shot RX10 III - Manual (Page 253)

[291] Troubleshooting Troubleshooting Battery pack and power
The power turns off suddenly.
Depending on the product and battery pack temperature, the product may turn off
automatically to protect itself. In this case, a message is displayed on the product screen
before the product turns off.
[292] Troubleshooting Troubleshooting Battery pack and power
The product gets hot.
When the product is used for a long time, the temperature of the product will rise. If the
product gets too hot, movie recording may be interrupted or the power may turn off
automatically to protect the product.
[293] Troubleshooting Troubleshooting Battery pack and power
The remaining battery level indicator shows an incorrect
level.
This phenomenon occurs when you use the product in an extremely hot or cold location.
There may be a difference between the remaining battery level indicator and the actual
remaining battery charge. Deplete the battery pack once, then charge it so that the
remaining battery level indicator is reset. The correct remaining battery level indicator may
not be displayed under some operating or environmental conditions.
Battery capacity decreases over time and through repeated use. If decreased usage time
between charges becomes significant, it is probably time to replace it with a new one.
[294] Troubleshooting Troubleshooting Battery pack and power
The charge lamp on the product flashes when charging
the battery pack.