Sybase Desktop - Manual (Page 150)

Chapter 8
150 / iAnywhere Solutions, Inc.
Navigating custom databases on a Pocket PC OS Device
Pylon Pro is installed on the device when you perform a sync operation
after enabling the conduit. Enabling the conduit means creating a filter
that maps to a custom database, selecting the filter, and setting the
synchronization action to Desktop overwrites Handheld. For more
information about configuring the conduit in the Pylon Configuration
database, see “Syncing custom databases” (page 133).
Viewing custom databases on a Pocket PC OS device
To view custom Lotus Notes databases on a Pocket PC OS Device:
1. Tap Start|Pylon Pro.
The Pylon Pro Workspace appears. By default, the Pylon Pro
Workspace is the initial screen that appears when you start Pylon
Pro for the first time.
Figure 8-1
Pylon Pro
Workspace on a
Pocket PC OS device
Note If no databases are loaded, then a “No custom databases installed”
message displays in the Workspace.
The Workspace displays the following information:
■
Notes database title : The title of the Lotus Notes database is
displayed at the bottom of the box. If the name is too long to fit
in the box, it is truncated, and a ellipses (...) is appended to the
string. By default, this is the title of the Lotus Notes database. You
can also enter an on-device title for the database under Pylon Pro
Configuration in the filter document. For instructions, see
“Creating a Pylon Pro filter to sync a custom database”
(page 135).