BenQ PhotoVue SW272U 27" 4K HDR Monitor - Manual (Page 22)

22
How to assemble your monitor hardware
• If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
• The following illustrations are for your reference only. The location and available input and output jacks
may vary depending on the purchased model.
• The supported timing may vary by input signal. Download Resolution file from the website (see Product
support on page 3 ). Refer to " Preset display modes " in Resolution file for more information.
Avoid finger pressure on the screen surface.
Never stand your monitor on a desk or floor without its stand arm and base. The controls on the bottom of
the front bezel are not designed to hold the weight of the monitor and may be damaged.
1. Attach the monitor base.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or
a mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the
monitor around on your desk will scratch or damage the monitor surround and controls.
Protect the monitor and screen by clearing a flat open
area on your desk and placing a soft item like the
monitor packaging bag on the desk for padding.
Gently lay the screen face up on a flat clean padded
surface so you can follow the instructions printed on
the quick start guide.
Attach the monitor stand to the monitor base as
illustrated.
Quick
S
ta
rt Gu
ide