BenQ PhotoVue SW272U 27" 4K HDR Monitor - Manual (Page 45)

45
2 Dial key (If no menu is displayed)
• Turn right or left to adjust
Brightness by default. To
change the default settings, press and hold for 3 seconds
to bring up the setup menu to change the default setting.
Alternatively, go to Custom Key > Dial on the monitor.
• Press to bring up the main menu.
• Press and hold for 3 seconds to bring up the setup menu
to change the default setting. Alternatively, see
Customizing your Hotkey Puck G3 on page 46 .
• (When the monitor is turned off) Press and hold for 3
seconds to turn on the monitor.
(On a menu)
• Turn right to scroll down the menu.
• Turn left to scroll up the menu.
• Press to confirm the selection.
(If a control bar is displayed)
• Turn right to increase the value.
• Turn left to decrease the value.
3 Exit key • Returns to the previous menu.
• Press and hold for 3 seconds to turn on/off the monitor.
• Exits OSD menu.
4 Information key Press to bring up the short Information menu. See Viewing
the current display settings on page 51 for more
information.
5 Shortcut key 1 • Press to switch to Adobe RGB ( Color Mode ) by default.
• Press and hold for 3 seconds to bring up the setup menu
to change the default setting. Alternatively, see
Customizing your Hotkey Puck G3 on page 46 .
6 Shortcut key 2 • Press to switch to sRGB ( Color Mode ).
• Press and hold for 3 seconds to bring up the setup menu
to change the default setting. Alternatively, see
Customizing your Hotkey Puck G3 on page 46 .
7 Shortcut key 3 • Press to switch to B+W ( Color Mode ).
• Press and hold for 3 seconds to bring up the setup menu
to change the default setting. Alternatively, see
Customizing your Hotkey Puck G3 on page 46 .
8 Channel switch Switches the Hotkey Puck G3 to work with different
monitor when multiple monitors are connected. See
Working with more than one monitor (IR Channel Setting)
on page 49 for more information.
No. Name Description