Power led indicator osd controls – BenQ PhotoVue SW272U 27" 4K HDR Monitor User Manual
Page 69
69
Power LED indicator
OSD controls
You are running the monitor at its native resolution, but the image is still distorted.
Images from different input sources may appear distorted or stretched on the monitor
running at its native resolution. To have the optimal display performance of each type
of input sources, you can use the
Display Mode
function to set a proper aspect ratio
for the input sources. See
for details.
The image is displaced in one direction.
Download
Resolution file
). Refer to
"
Adjusting the Screen Resolution
". And then select the correct resolution, refresh rate
and make adjustments based on these instructions.
Faint shadow from the static image displayed is visible on the screen.
• Activate the power management function to let your computer and monitor go into a
low power "sleep" mode when not actively in use.
• Use a screensaver to prevent the occurrence of image retention.
What are the supported video timings?
Download
Resolution file
). Refer to
"
Preset display modes
" for the supported timings.
The LED indicator is solid white or flashing white.
• If the LED lights up in solid white, the monitor is powered on.
• If the LED is illuminated in white and there is a message
Out of Range
on the screen,
this means you are using a display mode that this monitor does not support, please
change the setting to one of the supported mode. Download
Resolution file
from the
website (see
). Refer to "
Adjusting the Screen Resolution
".
And then select the correct resolution, refresh rate and make adjustments based on
these instructions.
• If the LED is illuminated in flashing white, the power management mode is active.
Press any button on the computer keyboard or move the mouse. If that does not help,
check the signal cable connectors. If any pin is bent or broken off, please contact
your dealer to get necessary support.
• If the LED is off, check the power supply mains socket, the external power supply and
the mains switch.
The OSD controls are inaccessible.
To unlock the OSD controls when it is preset to be locked, press and hold any key for
10 seconds.