Emerson 7003M - Manual (Page 31)

Operator Manual
748223-K
June 2002
Rosemount Analytical Inc. A Division of Emerson Process Management Operation 3-5
Model 7003M
CODE DEFINITION
A-1 toggle ON/OFF check of relay coil for Alarm 1
A-2 toggle ON/OFF check of relay coil for Alarm 2
D-2 performing non-intrusive test Internal RAM (16#00#..16#FF#)
D-3 performing non-intrusive test on Internal RAM (16#4000#..16#5FFF)
D-4 performing non-intrusive test on EEPROM (16#B600#..16#B7FF#)
D-5 performing non-intrusive test on PROM (16#C000#..16#FFFF#)
F-2 failed D-2 test
F-3 failed D-3 test
F-4 failed D-4 test
F-5 failed D-5 test
hld entering system Hold
OFF alarm relay is de-energized (normally-closed)
On alarm relay is energized (normally-open)
tSt entering on-line test diagnostics mode
Table 3-7. System Hold and Diagnostics Codes
CODE DEFINITION
caret lit displayed
O 2 sensor membrane voltage from ADC
Temp sensor thermistor voltage from DC
minus sign milliamps sent to current output
Table 3-8. Data Displayed in DIAGNOSTICS Mode
CODE DEFINITION
Sry invalid keypad function (Sorry)
run current function completed - entering RUN Mode
Table 3-9. Miscellaneous Prompts and Responses