Emerson 7003M - Manual (Page 61)

Operator Manual
748223-K
June 2002
Rosemount Analytical Inc. A Division of Emerson Process Management Replacement Parts 7-1
Model 7003M
SECTION 7
REPLACEMENT PARTS
7-1 CIRCUIT BOARD REPLACEMENT POLICY
In most situations involving a malfunction of a
circuit board, it is more practical to replace the
board than to attempt isolation and
replacement of an individual component. As
standard policy, rebuilt boards are available
on an exchange basis.
Because of the exchange policy covering
circuit boards, the following sections on
replacement parts do not include individual,
circuit board mounted components. If
circumstances necessitate replacement of an
individual component, which can be identified
by inspection or from the schematic diagrams,
obtain the replacement component from a
local source of supply.
7-2 MATRIX
7003M MODEL 7003M OXYGEN MONITOR*
Code Power
01 115 VAC, 50/60 Hz
05 230 VAC, 50/60 Hz
Code Mounting Options
01 Panel Mount - Standard
07 Wall Mounting Plate w/ Junction Box
08 Two-Inch Pipe Mounting Bracket
Code Gain Setting
50 Signal: High Level (Used with Rechargeable Sensor % Gas)
51 Signal: Low Level (Used with Disposable Sensor % Gas)
99 Signal: Special
7003M 01 01 50