Ericsson LBI-38732E - Manual (Page 17)

BUTTONS AND KNOBS
This section describes the primary function of the
button and knob controls. Other functions associated
with these controls are detailed in later sections.
SYSTEM
/GROUP
/CHANNEL
KNOB
Selects systems or groups/channels
(depending on programming). This is
a 16 - position rotary knob. See SYS-
TEM/GROUP/CHANNEL SELEC-
TION for details.
POWER
ON-OFF
/VOLUME
KNOB
Applies power to the radio and ad-
justs the receiver’s volume. Rotating
the control clockwise out of detent
applies power to the radio. A single
alert tone sounds (if enabled through
programming) to indicate the radio is
operational.
Rotating the control clockwise in-
creases the volume level. Minimum
volume levels may be programmed
into the radio to prevent missed calls
due to a low volume setting. While
adjusting the volume the display will
momentarily indicate the volume
level (i.e.
VOL = 31). The volume
range is from a minimum pro-
grammed level of zero (displayed as
OFF in the display) up to 31 which is
the loudest level.
17