Ericsson LBI-38732E User Manual
Page 97
the priority-one or priority-two channels are already
set and a new channel is then assigned as the
priority-one or priority-two channel, the previously
assigned priority channel with change to non-priority
scanning. The priority setting selection sequence is
set and stops at priority-one; therefore, the channel
must be deleted from the scan list by pressing
9
before the channel is set to a previous priority setting.
Any channel that is in a system’s channel scan list
will show
,
or when it is the selected chan-
nel.
DELETING CHANNELS FROM A SCAN LIST
1.
With scan operation turned off select the desired
channel to delete from the selected conventional
system’s channel scan list.
2.
Press
9
. , or
turns off. Any channel that
is not in a conventional system’s channel scan list
will not show , or when it is the selected
channel.
NUISANCE DELETE
A channel can also be deleted from the scan list, if it
is not the currently selected channel, by pressing
9
during scan operation while the radio is displaying the
unwanted channel. The channel will be deleted from the
conventional system’s channel scan list in the same
manner as if done using the steps above. Deletions done
in this manner will not remain deleted if the radio is turned
off and then back on.
S
2
1
S
2
1
S 2
1
97