Ericsson LBI-38732E - Manual (Page 59)

If the radio is programmed for forced private transmit
operation, "FRCD PVT" will be displayed if an at-
tempt is made to disable private transmit mode. It is
not possible to transmit on this group/channel in
clear mode.
If the radio does not have the correct encryption key
loaded, "NO KEY #" will be displayed and the call will
not be transmitted.
3. Continue with standard transmission procedures. A
private mode access tone will be heard when the
PTT button is pressed.
Scanned Group Calls
Receiving a scanned group call is the same as receiv-
ing a selected group call. During the scan hang time, if
the radio was programmed for autoselect, it will transmit
back in the same mode it received the call. For example,
if a clear group is entered in the scan list, it will only
receive clear calls. If the same group was available in
private and entered in the scan list, it can receive clear
and private calls, provided autoselect was programmed
in the radio. The user can select transmitting on the
scanned or selected group. If a group is entered in the
scan list more than once and in different modes (clear,
digital, private), only the first occurrence of the group will
be used.
59