Ericsson LBI-38732E - Manual (Page 71)

PROGRAMMABLE ENTRIES
Individual call ID numbers, telephone numbers and
other number sequences for overdialing are stored in the
special call lists when programming the radio. The first
ten entry locations of these lists can be changed by the
radio operator. The keypad is used when adding, chang-
ing and storing numbers in these entry locations.
Use the following procedure to store a number in one
of the first ten entries of a special call list:
1. Press
#
or
*
to enter the individual call list
or the phone call list. turns on. The selection
mode rules apply.
2. Scroll through the list using
,
or
.
until
one of the first ten entries is reached. NO ENTRY is
displayed if the location is empty.
3. Enter the desired number. If necessary, a pause can
be entered by pressing and holding
0- 9
,
* or # until an underscore appears in the
display. The individual call list entries will accept up
to 5 digits. The phone call list entries accept a com-
bination of up to 31 digits and pauses.
4. Press and hold m until the display changes
indicating that the number has been stored.
5. Repeat the steps above if the number stored in an
entry location needs to be changed.
SPC
71