Ericsson LBI-38732E - Manual (Page 85)

•
Transmitting Voice
•
Diagnostic/Test Keyload
•
All Conventional Modes
•
PA is PTT’d
STATUS/MESSAGE OPERATION
Status Operation
Status operation permits the transmission of a pre-
programmed status condition to the EDACS site.
To send a status condition, press the 7 key then
press one of the number keys (
0- 9
) to select
the pre-programmed status. If no status has been pro-
grammed for the selected number key, the radio will
display "NO ENTRY". A valid selection will permit the
status text to appear in the display for a pre-programmed
time. After the time-out expires or the
m key has
been pressed (the
m
key will override the time-out
period), the status is selected and will be transmitted to
the site or stored in the radio memory where it can be
polled by the site at a future time. If the site does not
receive the status properly, the radio will sound a low
pitched tone.
If an incorrect status was selected or the incorrect
number key was pressed, the status can be changed
during the pre-programmed time-out period by pressing
another number key. The status selection can also be
cancelled by pressing the CLEAR button prior to the
time-out period.
85