Ericsson LBI-38732E - Manual (Page 81)

DATA OFF Shown on top display line when the
radio is in the data disabled state.
DATA ON Shown for two seconds on top display
line when the radio is toggled to the data
enabled state.
Data Off Operation
DATA OFF suspends TX/RX data activity until it is
re-enabled via DATA ON. When the data state is dis-
abled, the display shows "DATA OFF" on the top line. The
radio can be placed in the data disabled state by any of
the following methods.
•
Declaring an emergency (not to be used unless an
actual emergency condition exists). Alert tone will
sound.
•
Pressing the OPTION button (if pre-programmed for
no data key). Alert tone will sound.
•
Pressing the no data (ND) key (pre-programmed).
Data On Operation
DATA ON/OFF applies to all radio data (i.e., MDT and
ProFile). DATA ON will be displayed on the top line in the
display for two seconds then the display returns to nor-
mal. The data state is enabled by one of the following
(depending on how it was disabled).
If DATA OFF is active, neither ProFile nor MDT
will function.
NOTE
81