Ericsson LBI-38732E - Manual (Page 35)

home System/Group or the current System/Group (how-
ever programmed).
To unlock the keypad when it is in the locked state,
press and release the m key and within one (1)
second press the OPTION button.
TURNING ON THE RADIO
Rotate the POWER ON-OFF/VOLUME knob clock-
wise, out of detent to turn the radio on. (Ensure the
antenna and battery pack are properly connected prior
to power on.) A short beep (if enabled through program-
ming) indicates the radio is ready for operation. The
display indicates, if programmed, the last selected sys-
tem name on line one and the last selected group or
channel name on line two.
In the EDACS trunked environment, upon acquisition
of the control channel, will come on. If communi-
cation with the system’s control channel cannot be es-
tablished, will not turn on. This may occur if, for
example, the radio is out of range of the trunking site. It
may be necessary to move to another location or select
another trunking system to re-establish the control chan-
nel link for trunked mode operations.
SELECTION MODE RULES
Many operations require selection from a list such as
system, group or phone number. This selection process
is handled in the same manner for all lists.
,
,
.
,
m
,
0- 9
,
*
,
#
, the
OPTION button and the CLEAR/MONITOR button are
SVC
SVC
35