Ericsson LBI-38732E - Manual (Page 79)

METHOD 2: Press * to enter the overdial se-
lect/entry mode and follow the selection
mode rules to call up a stored number
from the phone list or to directly enter the
overdial digits.
turns on. Press PTT
to send the overdial sequence once. If the
number needs to be transmitted again, it
must be selected or entered again (this
prevents unwanted numbers from being
sent the next time the PTT button is
pressed during the call).
This overdial select/entry mode remains
active until the call is dropped, cleared, or
m is pressed. The overdial select/en-
try mode can be re-entered if the call is still
active by pressing
* .
PORTABLE DATA
When operating in the EDACS configuration, M-RK
radios permit either voice or data calls to be transmitted
or received. The radio can handle only one type of call
at a time; however, selection of either data or voice is
elected transparently by the operator through normal
usage of the radio. Data communications is not sup-
ported in the conventional mode. DATA, RS2-Type DATA,
and ProFile are EDACS enhanced, separately pur-
chased features that when turned on can be used to
configure M-RK radios.
"Data" now applies to two classes of data: External
Device Data Applications (Mobile Data Terminals) and
Radio Destined Data Applications (ProFile). For Exter-
nal Device Data Applications, both destination and
SPC
79