Ericsson LBI-38732E - Manual (Page 36)

used during the selection process. The following example
systems list is used to explain the process:
SYSTEM
1 NORTH
2 SOUTH
3 EAST
4 WEST
After entering a selection mode, the following generic
display format will appear.
X X X X X X X X
Y Y Y
= Z Z Z
Line one shows the currently selected item name
(XXXXXXXX) from the list. Line two indicates the list
(YYY) that the selection is to be made from and the
number of the selected item (ZZZ) within the list. (In some
cases the information on lines 1 and 2 will be the opposite
of this example.) If SYSTEM 2 is the current selection,
the display appears as follows:
S O U T H
S Y S = 2
Line one contains the current system name, SOUTH,
and line two, SYS = 2, indicates that selection is from the
system list and it is the second system within the list.
A new system from the list is selected by using
,
and
.
or by directly entering the system number
with the numeric keys. , and . scroll through
the list in increasing and decreasing order respectively.
36