Ericsson LBI-38732E - Manual (Page 99)

TYPE 99 DECODE (CONVENTIONAL ONLY)
If the Type 99 Decode Option has been pre-pro-
grammed, individual selective calling is possible. The
radio can now decode individual, group or supergroup
paging calls. Two sets of Type 99 paging codes must be
pre-programmed into the radio. When the radio decodes
an appropriate Type 99 code sequence, an alert tone and
visual indicator is provided to the user. The receiver then
operates as a noise squelched unit until Type 99 is reset.
Type 99 decode continues to operate during this noise
squelched period. The appropriate Type 99 alert tone will
sound again if it detects a valid two-tone sequence.
Type 99 operation can be pre-programmed to be
enabled or disabled using the OPTION button or a se-
lected keypad key. Type 99 operation may be reset
manually or automatically (pre-programmed). Manual
reset is achieved by briefly pressing the CLEAR button.
Automatic reset, if enabled, occurs after a 30 second
interval following the most recent decode of a Type 99
tone sequence.
T99 is automatically disabled when Scan is
enabled.
NOTE
99