Ericsson LBI-38732E - Manual (Page 90)

Menu Selection
1. Press the
m
key and then use the RAMP control
,
or
.
to scroll through the selections until
SQUELCH is displayed. Then press m (SE-
LECT) again.
2. The display will show SQLCH=xx, where "xx" is the
value between 1 and 16.
3. Use the RAMP control
,
or
.
to scroll
through the values. Then press the m key to
save the new value after the display time-out (2
seconds). The displayed value will be selected and
saved.
4. If the
m
key is pressed before the time-out, the
menu feature will exit and the squelch level will not
be updated. The original value will be restored.
A value of 16 requires a strong signal to open
squelch, a value of 2 requires a very weak signal
to open squelch and a value of 1 is open squelch.
NOTE
When squelch adjust feature is activated,
Channel Guard, T99 decode and Scan are
disabled. When the squelch adjust feature is
exited, Channel Guard, T99 decode and Scan are
restored to their previous states.
NOTE
90