Ericsson LBI-38732E - Manual (Page 69)

2. Press
9
. turns off. Any group that is not in a
system’s group scan list will not show when it is
the selected group.
A group can also be deleted from the scan list, if it is
not the currently selected channel, by pressing
9
during scan operation while the radio is displaying the
unwanted group. The group will be deleted from the
system’s group scan list in the same manner as if done
using the steps above. Deletions done in this manner will
not remain deleted if the radio is turned off and then back
on.
Nuisance Delete
A group can also be deleted from the scan list, if it is
not the currently selected group, by pressing the 9
key during scan operation while the radio is displaying
the unwanted group. The group will be deleted from the
system’s group scan list in the same manner as if done
using the steps above. Deletions done in this manner will
not remain deleted if the radio is turned off and then back
on.
Turning Scan On
1.
Toggle scan operation on by pressing
3
.
will turn on when the radio is scanning.
S
S
SCN
Scan will be disabled temporarily when an
emergency is declared.
NOTE
69